LOUQE

A BUILD LIKE NO OTHER

The hardware of your choice is all bolted directly on to the “spine”, the back bone of the case. This enables the fastest and most convenient build experience possible with open component access from every angle.

QUALITY YOU CAN FEEL

Milled from solid blocks of aluminum, this case offers a level of quality rarely seen in any computer case out there. With a glass blasted deep anodized or cerakoted aluminum exterior the new GHOST S1 Mk3 has a quality that you actually can feel.

ONE SIZE DOESN'T FIT ALL

We don’t believe a computer case should be bigger than necessary. But, being a performance junky sometimes means you need to fit more than the Average Joe. The TopHat M and L modules are designed to expand the volume of your GHOST S1. Add a TopHat in the bottom, put it on top or even on both ends.

DESIGNED TO (NOT) STAND OUT

The GHOST stands out with its architecture and configurability, eliminating the traditional limits of a SFF case, at the same time its clean and minimal exterior blends in with every setting.

AIRFLOW IN FOCUS

Cool air is pulled in by each heat generating component and directed upwards through the top. This creates unparalleled cooling performance and allows for a system that is completely noiseless.

DIMENSIONS (H x W x D)
188 x 140 x 322 mm
VOLUME & WEIGHT
8,2 L & 2,5 kg
COLORS
Ash, Limestone and Arctic White
MATERIAL
Glass blasted hard anodized & cerakoted aluminum
RAGTAG
Vegan leather
TOPHATS (ACCESSORY)
M: 26 mm, L: 57 mm

GPU
Dual-Slot up to 145 x 45 x 305 mm
MOTHERBOARD
Mini-ITX
POWER SUPPLY
SFX, SFX-L
CPU HEATSINK
Up to 66 mm
WATER COOLING
240 mm AIO radiator thickness 31.5 mm, 2 x 25 mm high fans w. L TopHat
STORAGE
Up to 3 x 2.5″ HDD/SSD with tray + M.2 SSD
PCI RISER
Included Twin Axial 260 mm PCIe 16x Gen4 riser

TOPHAT (ACCESSORY)
COBALT TWINAX PCI-e RC260 GEN 4+

TOPHAT (ACCESSORY)

Add a medium or large TopHat in the bottom or on top of your Ghost. What you choose to use the space for is up to you, but we made it ready to fit 120mm wide accessories.

GHOST S1 fits a spec that meets the requirements of a hardcore gamer in terms of cooling, storage and full-length GPUs. However, it could be configured in different sizes by adding a TopHat of your choice, making space for extra 3.5″ HDDs, tons of 2.5″ SSDs, additional case fans, 120 and 240 mm AIOs, or just have it as a neat glove compartment

LEARN MORE

COBALT TWINAX PCI-e RC260 GEN 4+

Cobalt PCI-e Gen 4+ is included in Ghost S1 mk III.

Designing the Cobalt PCI-e Gen 4+ riser cable has been a long journey where every detail has been scrutinized and optimized for its specific application and then pushed further, beyond anyone’s expectations even past future standards. The result is a riser cable that considerably exceeds the PCI-e generation 4 requirements. It looks unconventional, we know, but we know that is what it takes to deliver unconventional reliability and speeds.

LEARN MORE